HFC PRODUCT | Lootom Telcovideo Network (Wuxi) Co., Ltd. - 2023上海龙凤_上海各区gm资源汇总

PRODUCT

HFC

OPTICAL AMPLIFIER OPTICAL NODE OPTICAL PLATFORM OPTICAL RECEIVER OPTICAL TRANSMITTER OPTICAL SWITCH RF AMPLIFIER RF SWITCH

TON680🍌0HⅡ Optical Node

TON6800HII optical node can be used for CATV network, digital network and telecom𒈔 network. It is especially suitable for the FTTx network where the fiber is extended ...

Current position：HOME > HFC

TON6800HⅡ Optical Node

Overview    TON6800HII optical node▨ can be used for CATV network, digital network and telecom network. It is especially suitable for the FTTx network where the fiber is extended to the building, and output directly cover subscribers.
   TON6800HII input opt♈ical power range is ＋2dBm～－8dBm, output is above 108dBuV. When the receiving optical power is －6dBm, C/N＞47dB.
   220V or 60V power supply optional, the high-performance c♋onversion circuit enable it turn into +24V, +5V DC power to supply the optical receiver internal device. Features         ● 🐬 Flexible Structural design, wide application: forward optical receiver, reverse ༒ optical transmitter or reverse RFoG;
        ● Perfect surge suppression🎀 circuitry, improved the anti-lightning strike and the prevention of lightning surge shocks;
        ● Input stage adopt imported low-noise GaAs amplifier, output stage adopt imported ꦑ CATV high-performance, high reliability amplify module, greatly improved the C/N and non-linear distortion characteristics while significantly reducing the power ꦉ consumption;
        ● Rigorous re🐲⛦liability test, MTBF ＞100,000 hours;
        ● Forward AGC function, optical power at the range -6dBm～+2dBm, the output level ﷽ change within ±1dB; ꦺ
        ● 🐟 RF output level fixed-adjustable, slope adjustable; 1～2 output ports optional, 𒆙 split/tap optional for 2 output ports;
        ● Network management interface transponder can be reversed, good for remote ౠ monitoring. Technical Specifications

	Item		Unit	Forward	Return
Optic	Optical wavelength		nm	1200～1600	1310±20
	Optical input ✃ 📖 power		dBm	-8～+2	—
	Optica🐼l output 🧜 power		dBm	—	≥0
	Optical return ♔ l🏅oss		dB	≥40	—
	Input power ind🔯icat๊e		dBm	1:1	OP test 𒅌 point:1V/mW
	Return laser type			—	DFB/FP optional (with isolation)
	Optical connector			FC/APC or SC/APC
RF	Bandwidth		MHz	47/87～860/1000	5～30/65
	Standard output leve꧃l (Refer to below Remark)		dBuV	≥108	—
	Link flatness		dB	±1.5
	RF outp𒈔ut ports 🎃 number		pcs	1～2	—
	RF test point		dB	－20±1.0
	Nominal RF input / output 💖 impedance		Ω	75
	Return loss		dB	≥16	≥16
	Link	C/N	dB	≥51.0	—
		CTB	dBc	≥65.0	—
		CSO	dBc	≥61.0	—
		NPR Dynamic Range	dB	—	15@NPR≥30
General	Dimension		mm	250×210×130
	Voltage		Vac	220 or 60
	Power Consumption		VA	＜19
	Operatiཧng Temperature		℃	－25～＋55
	Storage 🅷 Temperature		℃	－25～＋65
	Weight		Kg	3.2
Remark : Measured by sta𒀰ndard laser transmitter, the circuit is composed by 10km fiber and optical 💮 ඣ attenuator, optical received power is -1dBm. Frequency ranges at ✤ 550MHz, according to Chinese standard 🔜configure 59 PLA-D television channels. RF output signal slope is 12dB (862MHz), RF output signal 🔯 level is 108dBuV (Gallium arsenide 🌠 type power dou♕bling output stage).

Reverse Laser Transmitter (RFoG Burst Mode)

NO.	Item	Unit	Description
Optical
1	Nominal Wavelength	nm	1310/1590/1610
2	Laser Type		FP		DFB
3	Laser Operating ⛎ 𒆙 Mode		Burst Mode (Or Continuous Mode)
4	NPRꦜ@ Dynaﷺmic Range≥30dB	dB	20		25
RF
5	Recommended Input 🍃 Level	dBμV	80
6	Frequency Range	MHz	15/20/25～65	15/20/25～65
7	Flatness	dB	±0.75
8	Return Loss	dB	≥16